The Warriors Elite Ops Riggers Belt is made from the highest quality materials. The webbing used is 4088 type V11 and has a breaking strength of over 6000 lbs (2700kg). The metal buckles have a tensile strength of 2500 lbs (1133kg) and are finished with a dark grey phosphate. The belt material is treated with resin, which makes the belt stiff but flexible. Due to the resin treatment, the belt does not sag on the sides, but is stiff enough to support a pistol holster without the belt twisting.
SIZES
- S 29″ - 32″ (73.5 - 81.5cm)
- M 32″ - 35″ (81.5 - 90 cm)
- W 35″ - 38″ (90 - 96.5 cm)
- XL 38″ - 41″ (96.5 - 104 cm)
Warrior product materials:
Fabric
Warrior uses 500D fabric in its products. Made from 500D fiber, the fabric has excellent wear and tear resistance. The solution-dyed fibers are naturally stain-resistant and easy to clean.
Threads
The durability of a stitched product is determined by the quality of the thread used. The primary factors that shorten the life of a thread are mold and sunlight. To ensure the longest possible life span for WAS products, they use only nylon threads produced in the United States that are protected from UV light and mold.
Characteristics of the fibers used by Warrior:
- Fiber resistance to acids - good
- Fiber resistance to alkalis - good
- Fiber abrasion resistance - excellent
- Fiber heat resistance - 142 °C (maximum continuous heat resistance before product damage)
- Melting point of fibers - 265 °C
MOLLE alleys
The MOLLE webbing on Warrior products is designed to withstand heavy use. The Molle webbing is specced to withstand the following loads:
- 25mm (1 inch) breaking load: 544kg (1200 lbs)
- 38mm (1.5 Inch) breaking load: 816kg (1800 lbs)
- 50mm (2 Inch) breaking load: 997g (1800 lbs)
