The Warrior Assault System Low Profile MOLLE Belt (LPMB) is a two-level low-profile carrying device that allows the user to carry a variety of mission-specific pockets, bags and holsters. In addition to pockets, the LPMB belt can also be equipped with various thigh-mounted panels or holsters. The first level of the belt is a thin, simple belt covered with a Velcro surface. The thin first-level belt is threaded into the belt loops of the trousers in the same way as traditional belts. The second, or top, level of the belt has two rows of standard MOLLE webbing on the surface. The back of the top belt is covered with a Velcro surface, which securely attaches the belt to the Velcro counterpart on the underbelt. In addition to the Velcro, the top belt is secured in place by a composite GT Cobra buckle. The top MOLLE belt can be easily removed at any time by opening the Cobra buckle and tearing off the Velcro surface. The included Cobra buckle MOLLE belt can be replaced with a Riggers belt if needed. The LPMB attached pistol holster allows for a very smooth draw, as the belt, which attaches to the pants with Velcro, prevents the belt from moving when pulling the pistol or magazines from the magazine pockets.
Sizes:
M - MEDIUM: waist 86 cm - 95 cm
L LARGE waist 96 cm - 103 cm
XL - EXTRA LARGE waist 104 cm +
Weight:
M 0.425kg
L 0.455kg
XL 0.485kg
Warrior product materials:
Fabric
Warrior uses 500D fabric in its products. Made from 500D fiber, the fabric has excellent wear and tear resistance. The solution-dyed fibers are naturally stain-resistant and easy to clean.
Threads
The durability of a stitched product is determined by the quality of the thread used. The primary factors that shorten the life of a thread are mold and sunlight. To ensure the longest possible life span for WAS products, they use only nylon threads produced in the USA that are protected from UV light and mold.
Characteristics of the fibers used by Warrior:
- Fiber resistance to acids - good
- Fiber resistance to alkalis - good
- Fiber abrasion resistance - excellent
- Fiber heat resistance - 142 °C (maximum continuous heat resistance before product damage)
- Fiber melting point - 265 °C
MOLLE alleyways
The MOLLE webbing on Warrior products is designed to withstand heavy use. The Molle webbing is specced to withstand the following loads:
- 25mm (1 inch) breaking load: 544kg (1200 lbs)
- 38mm (1.5 Inch) breaking load: 816kg (1800 lbs)
- 50mm (2 Inch) breaking load: 997g (1800 lbs)
